Contact: manager Xie
Cell phone: 18902897663
Web site: www.slmlyf.com
Address: No. 2 North Road, Cao Bian third industrial area, Nanhai District, Foshan, Guangdong.
The shower room is divided into the shower room and the simple shower room according to the function; the shower room, the shaped bath screen, the arc shower room, the bathtub and so on are divided according to the style. The shower room is divided into square, round, fan-shaped and diamond shaped shower room according to the shape of the chassis, and the door structure is divided into the door, the folding door, the open shower room and so on.
The simple shower room has no "roof" and is rich in style. Its basic structure is a bottom basin or artificial stone bottom or natural rock bottom. The bottom basin is made of ceramic, acrylic, artificial stone and so on. The bottom sill or bottom basin is equipped with plastic or tempered glass shower room. The tempered glass doors have ordinary tempered glass, high quality tempered glass, and water waved tempering. Glass and plate glass and other materials.
Detailed solution of simple shower room device
1, prepare the necessary tools.
2, the device bottom basin: combined bottom basin parts, adjust the bottom basin level, ensure that there is no water in the basin and pelvic floor. The hose can be telescopic with the distance, and it will connect the pelvic floor to the floor drain.
3, test and protect: after loading, we need to test the water to ensure that the water runs in all directions. Four, find and punch holes: use pencil and horizontal ruler to determine the drilling position of the aluminum wall against the wall and punch holes with the percussion drill.
4, in the hole type device: aluminum particles, screw the aluminum lock on the wall.
5, fixed glass: close the glass clip to the bottom hole and screw it up.
6, device jacking: locate the corresponding position above the fixed glass borehole, install (straight / inclined) fixed seat and connect the top pipe. Fix it on the top of the glass with a elbow sleeve.
7, the device rack: the alignment device, the rack, the screwed nut, the fixed laminated glass, to maintain vertical and horizontal. Pay attention to waterproof under the aluminum material of the fixed glass.
8, the movable door device: hardware installed movable door hinges, will be installed on the fixed door reserved hole. After loading, adjust the orientation of lotus leaf's shaft core and get the best handle.
9, make waterproof: install the suction bar or water retaining glue on the side or bottom of the glass according to the requirement. Silica is used to sew the aluminum material tightly with the wall, glass and bottom basin joint.
10, debugging and fastening: check whether the parts are comfortable and smooth, and find problems should be adjusted in time. After adjustment, screw up the corresponding screws, so that all the shower rooms will become more solid.
11, finishing work: insert decorative aluminum strip into the wall to ensure the appearance is clean and generous. In the end, we need to wipe out all the shower rooms with a rag